Cone Bottom Tanks
Available in 30º, 45º, and 60º slopes, sizes range from 15-13,000 gallons.
Material options for a diverse range of application requirements.
- High-density linear polyethylene (HDLPE)*- black and natural white color - complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
- Cross-linked, high density polyethylene (XLPE) - black and natural white color
Available with seismic zone 4 and UBC 110 mph wind restraint tie-down systems.
Specific gravity ratings are based on the industry's most severe calculation.
Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request.
All materials are UV stabilized for long-term outdoor service.
Maximum operating temperature recommended for Cone Bottom tanks is 100 degrees F.
Tank dimensions may vary depending on manufacturing location - please Contact factory for drawing specific to the F.O.B. location. Specifications Subject to Change Without Notice.
NOTE: Dimensions listed below and on drawings may vary +/- 3% (standard rotational molding tolerance).

Part Number CONE BOTTOM  - 15, 30, 45 & 60 degree Degree Cone Diameter Height with Stand F.O.B.
1520000N-- 15 Gallon - OPEN TOP W/COVER 45 17 38 L
1850000N-- 17 Gallon 60 19 34 L
1580000N-- 35 Gallon 30 30 34 L
1560000N-- 65 Gallon 30 30 41 L
6070000N-- 110 Gallon 30 30 56 L
1560400N- 225 Gallon W/POLY STAND 30 48 54 C
1560500N- 325 Gallon W/POLY STAND 30 48 66 C
1560300N- 475 Gallon 30 60 70 C
1880100N-- 500 Gallon 45 60 85 C
6190000N-- 500 Gallon 45 64 80 L
1890000N-- 1000 Gallon 30 86 83 L
5000000N-- 1000 Gallon 45 64 120 L
8310000N-- 1250 Gallon 30 95 91 M
1900000N-- 1400 Gallon 30 86 94 L
5010000N-- 1500 Gallon 45 64 158 L
8330000N-- 1600 Gallon 30 95 95 M
1910000N-- 1650 Gallon 30 86 110 L
5070000N-- 2000 Gallon 30 90 125 L
5110000N-- 2500 Gallon 30 90 148 L
8350000N-- 2500 Gallon 30 95 125 M
5100000N-- 2600 Gallon 45 90 160 L
5150000N-- 3000 Gallon 30 90 167 L
8360000N-- 3000 Gallon 30 95 141 M
5440000N-- 3900 Gallon 30 90 203 L
5180000N-- 4100 Gallon  45 90 216 L
5200000N-- 4400 Gallon 30 90 222 L
7040000N-- 5500 Gallon 30 90 255 L
5280000N-- 6000 Gallon 30 142 159 L
7180000N-- 6500 Gallon 30 90 296 L
5320000N-- 7400 Gallon 30 142 179 L
5340000N-- 11,500 Gallon 30 142 238 L
7490000N-- 13,000 Gallon 30 142 260 L
Part Number SMALL CONE STANDS
48900 15 Gallon Cone Stand
48400 17 Gallon Cone Stand
48600 35, 65, 110 Gallon Cone Stands
Part Number CONE STANDS - 30 & 60 DEGREE FOB "C" TANKS
C5070P 70 (P/N H15601--) 70 Gallon Basket & Stand
C5475P 475 (P/N H15603--) 475 Gallon Basket & Stand
C5500P 500 (P/N H18801--) 500 Gallon Basket & Stand
Part Number CONE STANDS 30 DEGREE
79000 (welded) 86" 4 Leg Stand for 500,1000,1400,1650 Cone Tanks
78900 (welded) 86" SEISMIC 4 LEG for 1650 Cone Tank
79300 (welded) 90" 12 Leg 65 TON Stand for 2000-6500 Cone Tanks (SEISMIC for 2000-3000 Cone Tanks)
79800 (welded) 90" 12 Leg SEISMIC stand for 3900-4400 Cone Tanks
79500 142" 12 Leg 100 TON GROSS WEIGHT CAPACITY Stand for 6000 - 11,500 Cone Tanks
79600 20" Cone Bottom Stand Extension
79700 40" Cone Bottom Stand Extension
78401000 95" Cone Stand
Part Number CONE STANDS 45 DEGREE
78800 (welded) 64" 12 TON 4 Leg Stand for 500,1000,1500 Cone Tanks
79900 90" 12 Leg SEISMIC for 4100 - 5600 Cone Tanks
79400 90" 60 TON 12 Leg Stand for 2600-5600 Cone Tanks
TOTAL DRAIN TANKS  - Closed Top Tanks
(These total drain tanks must be ordered with plastics stands listed below  - No Exceptions)
Snyder Part No. Tank Capacity Dish Bottom Nominal Diameter Nominal Height F.O.B.
5790000N45 55 10-15 degrees 22 39 1/4 L
5800000N45 90 10-15 degrees 30 36 L
5810000N45 120 10-15 degrees 30 4601/2 L
5820000N45 150 10-15 degrees 30 57 L
5830000N45 200 10-15 degrees 36 53 1/4 L
1540100N45 200 10-15 degrees 40 52 3/4 L
5840000N45 250 10-15 degrees 36 65 L
5850000N45 275 10-15 degrees 42 54 1/2 L
5860000N45 330 10-15 degrees 42 64 L
5870000N45 360 10-15 degrees 48 55 1/4 L
5880000N45 440 10-15 degrees 48 65 3/4 L
5890000N45 500 10-15 degrees 48 79 1/4 L
1800100N45 550 10-15 degrees 48 81 L
1810100N45 850 10-15 degrees 48 123 L
PLASTIC STANDS (required on tanks listed directly above)
Snyder Part No. Stand Nominal Diameter Nominal Bottom Clearance F.O.B.
137023 22 22 12 L
137001023 22 22 18 L
169023 30 30 12 L
169001023 30 30 18 L
173023 36 36 12 L
173001023 36 36 18 L
175023 42 42 12 L
175001023 42 42 18 L
176023 48 48 12 L
176001023 48 48 18 L
Note:  all stands are coated with black water based enamel paint with rust inhibitor
Cone Bottom Tanks available in 1.5, and 1.9 Specific Gravity in HDLPE and XLPE materials.  Contact factory for availability.
SEISMIC CONE STANDS:  All above stands are seismic approved, however you must use designated stand where gallonage is indicated
Contact Factory for Seismic on 5600, 6500, 11,500 Cone Bottom Tanks
F.O.B:  L = Lincoln, Nebraska; M = Marked Tree, Arkansas; P = Philippi, West Virginia; C = Chowchilla, California
Top